Tilting chamfering/polishing machine.
ADJUSTABLE FACET ANGLE
The chamfer angle is adjustable from 27 ° to 63 °.
This allows the angle to be adapted to the needs of
the customer. For example, for the production of
boxes (gluing space).
AUTOMATIC FEEDING UNIT
The machine has an automatic feed unit
for a homogeneous forward movement to guarantee a
ADJUSTABLE MILLING DEPTH
The milling / polishing depth can
be adjusted precisely and conveniently from the front of
The chips accumulate in an easily
accessible drawer. If required, an additional
external chip estractor can be installed.
ADJUSTABLE MILLING SPEED
The cutting speed is adjustable to allow
the processing of different materials and
to produce different surfaces.
MILLING / POLISHING TOOLS
A selection of more than 40 tools allows processing
of plastics (PMMA, PC, PET-G, SAN, etc.) or composite
materials (PMMA with aluminum or paper). As well as
the production of high gloss, shiny or satin finished surfaces.
With the tools of the type HIGH SPEED you can increase
the feed rate up to 200%.
Thickness of piece (mm)
2 … 100
Workpiece length (mm)
Tilting range (°)
27° … 63°
Milling spindle power (kW)
Power of feed motor (kW)
Machine length (mm)
Machine width (mm)
Machine height (mm)
Work table height (mm)
Feed speed (m/min)
0,1 … 5,0
Cutting speed (rpm)
9.000 … 18.000
Milling depth at 45 ° (mm)
0,05 … 5,0 (per step)
Voltage / Frequency (V / Hz)
230 V 50 Hz (opciones)
Total power (kW)
Standard gloss – code RED